DOALL CO -- 150 CUTTING FLUID  -- 9150-00N048968
<pre>=====================  Product Identification  =====================

Product ID:150 CUTTING FLUID
MSDS Date:01/31/1993
FSC:9150
NIIN:00N048968
=== Responsible Party ===
Company Name:DOALL CO
Address:254 NORTH LAUREL AVE
City:DES PLAINES
State:IL
ZIP:60016
Country:US
Info Phone Num:708-803-7272
Emergency Phone Num:800-535-5053
CAGE:18056
=== Contractor Identification ===
Company Name:DOALL CO
Address:254 NO LAUREL AVE
Box:City:DES PLAINES
State:IL
ZIP:60016
Country:US
Phone:847-803-7366
CAGE:18056

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
    HEAVY NAPHTHENIC; (SEVERELY HYDROTREATED NAPHTHENIC OIL)
CAS:64742-52-5
RTECS #:PY8035001
Fraction by Wt: 93%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:CHLORINATED FATTY ESTER
CAS:68440-29-9
Fraction by Wt: 3%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ANIMAL FATTY OIL; (LARD OIL)
CAS:8016-28-2
Fraction by Wt: 4%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: BREATHING DIFFICULTY.
    EYES: MINOR IRRITATION. SKIN: DEFATTING AND/OR MINOR IRRITATION.
    SKIN ABSORPTION NOT EXPECTED TO OCCUR. INGESTION: NAUSEA AND/OR
    DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. IF NECESSARY, SUPPORT
    BREATHING. GET MEDICAL ATTENTION. EYES: FLUSH WITH WATER FOR AT
    LEAST 15 MINUTES. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
    SKIN: WASH EXPOS ED AREA WITH MILE SOAP AND WATER ONLY. DO NOT USE
    HARSH SOAP OR SOLVENT. GET MEDICAL ATTENTION IF ABSORBED THROUGH
    SKIN. INGESTION: KEEP PERSON WARM AND QUIET. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:265F,129C
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER STREAM/SPRAY TO COOL CNTNRS TO PVNT VAP FORM & IGNIT, MAY
    SPREAD FIRE. FOG NOZZ PREF IF WATER IS USED.
Unusual Fire/Explosion Hazard:OXIDES OF CARBON AND HYDROGEN CHLORIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS: USE ABSORBENT MATERIAL. LARGE
    SPILLS: DIKE AND PUMP INTO DRUMS. RESIDUE: MOP WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE DRY IN CLOSED CONTAINER IN A
    COOL PLACE AWAY FROM ANY FIRE SOURCE.
Other Precautions:AVOID BREATHING MIST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:GENERAL MECHANICAL VENTILATION SHOULD BE ADEQUATE. IF
    MISTING OCCURS, PROVIDE LOCAL VENTILATION.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPVD SFTY GOGGS & FACESHIELD (FP N
Other Protective Equipment:EMERGENCY SHOWER AND EYE WASH MEETING ANSI
    DESIGN STANDARD IN WORK AREA . OILY CLOTHING SHOULD BE CHANGED
    (SUPDAT)
Work Hygienic Practices:PRACTICE REASONABLE PERSONAL HYGIENE. WASH
    EXPOSED SKIN WITH MILD SOAP AND WARM WATER ONLY.
Supplemental Safety and Health
OTHER PROT EQPT: PROMPTLY AND LAUNDERED BEFORE RE-WRING.

==================  Physical/Chemical Properties  ==================

HCC:V6
Vapor Density:>1
Spec Gravity:0.920 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID; OILY ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON AND HYDROGEN
    CHLORIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:TREAT AS AN OILY WASTE AND DISPOSE OF IN
    ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.