ZEP MFG CO -- ZEP BUFF-UP, 1909 -- 7930-01-412-0973
===================== Product Identification ===================== Product ID:ZEP BUFF-UP, 1909 MSDS Date:05/22/1992 FSC:7930 NIIN:01-412-0973 === Responsible Party === Company Name:ZEP MFG CO Address:1310 SEABOARD INDUSTRIAL BLVD NW Box:2015 City:ATLANTA State:GA ZIP:30301 Country:US Info Phone Num:404 352-1680 Emergency Phone Num:800-424-9300 (CHEMTREC) CAGE:0990Y === Contractor Identification === Company Name:ZEP MANUFACTURING COMPANY Address:1310 SEABOARD INDUSTRIAL BLVD NW Box:2015 City:ATLANTA State:GA ZIP:30318 Country:US Phone:877-428-9937 CAGE:27674 Company Name:ZEP MFG CO Box:2015 City:ATLANTA State:GA ZIP:30301-5000 Country:US Phone:404-351-2952/404-432-2873 CAGE:0990Y ============= Composition/Information on Ingredients ============= Ingred Name:NONYLPHENOXYPOLY (ETHYLENEOXY) ETHANOL; NPE; POLY (OXY-1,2-ETHANEDIYL); ALPHA-(NONYLPHENYL)-OMEGA-HYDROXY CAS:9016-45-9 RTECS #:MD0905000 Fraction by Wt: <5% Other REC Limits:NONE RECOMMENDED Ingred Name:ISOPROPYL ALCOHOL; IPA; DIMETHYLCARBINOL; 2-PROPANOL CAS:67-63-0 RTECS #:NT8050000 Fraction by Wt: <5% Other REC Limits:NONE RECOMMENDED OSHA PEL:400 PPM;STEL-500 PPM ACGIH TLV:400 PPM;STEL-500 PPM Ingred Name:DIPROPYLENE GLYCOL METHYL ETHER, DIPROPYLENE GLYCOL MONOMETHYL ETHER CAS:34590-94-8 RTECS #:JM1575000 Fraction by Wt: <5% Other REC Limits:NONE RECOMMENDED OSHA PEL:100 PPM;STEL 150 PPM ACGIH TLV:100 PPM;STEL 150 PPM ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:THIS PRODUCT MAY IRRIT EYES & SKIN UPON CONTACT. INFLAMMATION OF THE EYE IS CHARACTERIZED BY REDNESS, WATERING, AND ITCHING. SKIN INFLAMMATION IS CHARACTERIZED BY ITCHING, SCALING, REDDENING, OR BLIST ERING. OVEREXPOSURE BY INHALATION MAY CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION CHARACTERIZED BY NAUSEA AND VOMITING. Effects of Overexposure:NONE Medical Cond Aggravated by Exposure:NONE ======================= First Aid Measures ======================= First Aid:SKIN:IMMED FLUSH CONTAM SKIN W/PLENTY OF WATER. CONSULT A PHYSICIAN IF IRRIT DEVELOP. EYES: IMMED FLUSH EYES W/LOTS OF WTR FOR @ LEAST 15 MIN, OCCASIONALLY LIFT UP & LOWER LIDS. GET MED ATTEN AT ONCE. INHALE: MOVE EXPOSED PERSON TO FRESH AIR. IF IRRIT PERSIST, GET MED ATTEN PROMPTLY. INGEST: DON'T INDUCE VOMITING. IF VOMITING OCCURS, KEEP HEAD BELOW HIP LEVEL. GET EMERGENCY MEDICAL ATTENT @ ONCE. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:150F,66C Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER FOG, AND ALCOHOL FOAM Fire Fighting Procedures:WEAR SELF-CONTAINED POSITIVE PRES. BREATHING APPARATUS. Unusual Fire/Explosion Hazard:FIRE EXPOSED DRUMS SHOULD BE COOLED WITH STREAM OF WATER. ================== Accidental Release Measures ================== Spill Release Procedures:OBSERVE SAFETY PROCEDURES IN SECTION 4 & 9. ABSORB SPILL ON INERT ABSORBENT MATERIAL (EG ZEP -O-ZORB) PICK UP & PLACE RESIDE IN A SUITABLE WAST CONTAINER OR, IF PERMITTED, FLUSH TO SEWER. THOROUGHLY R INSE SPILL AREA WITH WATER. ====================== Handling and Storage ====================== Handling and Storage Precautions:*A SANITARY SEWER W/PLENTY OF WATER MAY BE PERMISSIBLE. CONSULT LOCAL, STATE, & FEDERAL AGENCIES FOR PROPER DISPOSAL IN AREA. Other Precautions:STORE TIGHTLY CLOSED CONTAINER IN DRY AREA @ TEMPS BETWEEN 40-120F. KEEP PRODUCT OUT OF EYES. AVOID PROLONGED CONTACT WITH SKIN. KEEP OUT OF REACH OF CHILDREN. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NO SPECIAL MEASURES ARE NEEDED IF VENTILATION IS ADEQUATE. Ventilation:PROVIDE LOCAL EXHAUST/VENTILATION AS NEEDED TO KEEP CONCENTRATION OF VAPORS BELOW EXPOSURE LIMITS (PEL/TLV) Protective Gloves:NEOPRENE, NITRILE, RUBBER GLOVES * Eye Protection:TIGHT-FITTING SAFETY GLASSES RECOMMENDED Other Protective Equipment:*IS STRONGLY RECOMMEND FOR PROLONG CONTACT. Work Hygienic Practices:CLOTHING OR SHOES WHICH BECOME CONTAMINATED WITH SUBSTANCE SHOULD BE REMOVED PROMPTLY & NOT WORN UNTIL THOROUGHLY CLEAN. Supplemental Safety and Health KEEP OUT OF THE REACH OF CHILDREN. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:212F,100C Spec Gravity:1.008 pH:8.6 Evaporation Rate & Reference: 1.0(WATER=1) Solubility in Water:DILUTABLE Appearance and Odor:TRANSLUSCENT, MILKY-WHITE LIQUID Percent Volatiles by Volume:97.5% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Stability Condition to Avoid:STRONG OXIDIZING AGENTS Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, OXIDES OF NITROGEN, AND AMMONIA. Conditions to Avoid Polymerization:HEAT, SPARKS, OPEN FLAME OR ANY SOURCE OF IGNITION. ==================== Disposal Considerations ==================== Waste Disposal Methods:LIQUID WASTES ARE NOT PERMITTED IN LANDFILLS. PRODUCT IS NOT CONSIDERED HAZ WASTE UNDER RCRA. UNUSABLE LIQUID MAY BE ABSORBED ON AN INERT ABSORBENT MATERIAL, DRUMMED & TAKEN TO A CHEMICAL OR INDUSTRIA L LANDFILL. SOME AREAS DISPOSAL BY FLUSHING INTO Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.